Symbols of Ancient Egyptian civilization.

Ancient Egyptian civilization has always been a subject of admiration for the whole world .
In an age when other parts of the world are trying to find a way to hdup more civilized , the Egyptian civilization has reached its peak .
In addition to achievements in technology such as the calendar and the clock , they have been able to develop a system of reading and writing called hieroglyphics .
Hieroglyphs have lots of pictures and symbols . The symbol is also a part and indivisibility of the spiritual life of the ancient Egyptians .
Important symbols used by the ancient Egyptians.

Ankh .

 The ankh is an ancient Egyptian symbol shaped like a cross with a circle above the head of the key .
Also referred to as the Key of Life , Key of the Nile , or the Breath of Life , ankh represents eternal life .
Most Egyptian deities depicted holding the ankh looks . Believed that people need a ' breath of life ' after death .
Ankh most commonly found in tomb paintings in ancient Egyptian god of the afterlife bless describe a person who has died .
The ancient Egyptians also carry this symbol as an amulet .

Amenta .

Amenta represents the world of the dead , which means the underworld ( underworld ) or the world that lies beneath the real world .
Amenta symbolizes the land where the dead are buried and thus also the point where the journey begins hereafter .
Amenta believed to be a mythical land . In the next period , Amenta land is believed to be located in areas near the west bank of the Nile where the dead are generally buried .
This symbol is found in the paintings on papyrus scrolls in the ancient Book of the Dead which was written .
Amenta is also found in hieroglyphic texts that had to do with death and life after death .

Djed pillar .

Djed Pillar is one of the most common symbols used in Egyptian mythology .
This symbol represents strength and stability . Initially , Djed pillar of Ptah was associated with the creation of so-called ' Djed Majesty ' .
Later, this symbol is associated with the backbone or the god Osiris ruler hereafter.
Djed Pillar is also considered to represent the human spine in general because both have a similar form .
That's because, Djed pillar is a symbol that is often found at the bottom of the coffin in which the spine is placed .
Djed pillars are also made ​​in the form of amulets and placed near the back of the mummy to ensure its revival .

Ba .

 Ba is a symbol that represents the soul or personality of a person .
The ancient Egyptians believed that Ba will stay alive even after a person dies .
Ba is described as a bird that has a human head that will go to the afterlife from the tomb of the dead person .
There is a belief that when the gods intervened in earthly things , then in fact they are working Ba .
This belief is related to the belief that the pharaoh had a divine right where he acted as a mediator between the gods to the people .
In this sense , the king or pharaoh known as Ba god .

Eye of Horus .

Eye of Horus represents the physical safety and well-being .
Horus was the ancient Egyptian sky god depicted as a falcon.
Eye of Horus also represent sacrifice and healing qualities .
This symbol has seven different versions are represented by seven different hieroglyphs .
Eye of Horus appear repeatedly in ancient Egyptian funerary text called ' The Litany of the Eye of Horus ' .

Winged sun disc .

Winged solar disc represents one form of the god Horus Behdety .
This symbol of the sun disc-shaped wings and a symbol that is also found in many other cultures around the world .
According to Egyptian mythology , the god Thoth uses his magic to turn Horus into the shape of a winged disc .
It is a symbol of protection and prowess were found painted on the door of the tomb and on papyrus scrolls .

Maat feather .

Maat is the ancient Egyptian goddess who set the world remained in an orderly condition and prevent the universe back into chaos .
Thus , Maat symbolized order , balance , prosperity, and justice . This symbol also symbolizes the moral values ​​and ethics .
Ancient paintings that depict the pharaoh also wears a feather Maat in the form of an amulet or pendant that show their responsibility in maintaining social order and justice .
The ancient Egyptians believed that the souls of the dead if it weighs exceed Maat feather , it means that his soul was filled with sin that deserves punishment from Ammit .
Conversely , if the soul is more lighter than Maat , means that one is free from sin so that will be sent to the world of Osiris .

Scarab .

Scarab beetle is a scarab -shaped symbol which is one species of dung beetle .
Dung beetle lays its eggs in a ball of dirt and menggulirkannya on the same ground as the sun rolled across the sky .
This symbol symbolizes the phenomenon of spontaneous creation which children like dung beetles emerge from an unknown place .
In ancient hieroglyphics , the scarab thought to be associated with the sun god Khepri morning that also symbolizes the existence and creation .

Ka .

The ancient Egyptians gave much attention to the concept of life and death and life after death .
Therefore, they have a lot of concepts related to the cycle of life and death along with a series of accompanying symbolism .
Ka is the element that makes people different from the living dead. In other words, he is a breath someone who no longer exists after death .
The ancient Egyptians believed that the Ka could be maintained and restored through food and drink .
Therefore , they will make offerings of food and drink for the dead so they can live a life after death with ease .
Ka is represented by two hands up to the elbows are bent upwards. This symbol is found in hieroglyphics, tombs, and the inside of the pyramid.

Primordial mound .

Primordial mound is an important symbol associated with the ancient Egyptian creation myth .
The ancient Egyptians believed that there is only one hill / mound that emerged from the sea of chaos at the beginning of the time of creation .
Of these mounds popping up all life on earth so that makes it a primordial entity that is responsible for the evolution of life .
The idea of ​​the pyramids and temples of ancient they are believed to be derived from this concept . So , thank you for reading this article .
Written and posted by Bambang Sunarno.  sunarnobambang86@gmail.com
author:
http://schema.org/Personal.
https://plus.google.com/105319704331231770941.
name: Bambang Sunarno.
http://primadonablog.blogspot.com/2014/02/symbols-of-ancient-egyptian-civilization.html
DatePublished: February 01, 2014 at 21:19

7MHPNPADAEFW

Tag ; Symbols of Ancient Egyptian civilization, simbol

Your desktop computer is damaged.

Consideration :

When your desktop computer is damaged , you 'll want to quickly find a replacement .
Replacing a desktop with a laptop is a tempting option . Laptops offer portability and flexibility .
However , there are some other factors that you should consider before replacing desktops with laptops .
Although it seems tempting , is not necessarily an automatic desktop can be replaced with a laptop to meet your needs .
Here are some factors to consider before deciding to replace the desktop with a laptop .

1. Price Versus Capabilities.

There is no striking difference between the performance capabilities of a desktop and a laptop if it is used mostly for running office programs or browsing the internet .
However , if you intend to run a program that requires intensive resources such as graphics editing , audio or video , then you better stick with the desktop .
A laptop with high capabilities , 3D graphics capabilities , and high-resolution screen would be worth considerably more expensive than a desktop with the same specs .

2. Ergonomics.

If the intention of the computer for a long time every day , you need a computer to make sure you wear comfortable as possible and no bad effect on health .
Laptops are often referred to less ergonomic than the desktop .
According to Cornell University Ergonomics Web , " ... if the laptop keyboard in the optimal position for the user , the screen is not optimal . Conversely , if the screen is in an optimal position , the keyboard is not .
As a result , the laptop can not meet all the elements of ergonomics as we have in the desktop .
Compromise can be achieved by using an external keyboard and mouse while using a laptop at home so you have the flexibility to reposition the screen and keyboard on the most ergonomic position .

3. Energy consumption.

The annual cost of electricity consumed by computers is not a trivial thing .
Average desktop consumes more power than a decent laptop so make it as one of the considerations .
According to one study , a laptop can save an average of 80 % of electrical energy and 32 % of the total cost of ownership .

4. Customization and Upgrade.

If you need to add memory or other peripherals , then desktops offer greater convenience than a laptop .
Price Deskop components are also relatively cheaper than laptops with similar specifications .

5. Damage risk.

You certainly want your computer to last as long as possible .
Laptops are known to be susceptible to accidental damage - as exposed to water droplets or spill a drink , or even dropped during transport .
On the other hand , tend to be placed on the desktop of the position that has the risk of accidental damage smaller .
Factors Considerations When Choosing a Laptop Screen Size .
Laptop screen size is measured diagonally from corner to corner .
Screen size generally be one of the main considerations when a person wants to buy a laptop .
When about to decide , is not as simple consideration that the larger screen would have been better .
The large screen means it will add to the weight of the device making it difficult mobility . In addition , larger laptops are generally also more expensive .
Here are some factors you need to consider before choosing the appropriate screen size for your laptop .

1. Portability.

The difference in terms of portability ( mobility ) will feel significantly different even though the screen size is only one or two inches .
For example , one type of laptop that has a 15.6 inch screen with another laptop that has a 17.3 -inch screen will have approximately 3 kg weight difference .
Three pounds may sound insignificant , but the weight is still to be coupled with power cables, peripherals , and other equipment .
In total , the difference in weight can be up to 5 kg with a different screen size of only one inch .

2. Screen resolution.

Screen resolution is measured in pixels ( height times length ) . Higher resolution will show a sharper image , which will affect the maximum while watching movies , playing games , or editing photos.
Larger screens usually have higher resolution and accommodate more visibility than smaller screen with the same resolution yangs .
That is , the larger the size of the screen can be viewed from a greater distance than when using a laptop with a smaller screen size that has the same resolution .

3. Aspect Ratio.

Most laptops today have multimedia capabilities with a 16:9 aspect ratio screen that resembles a big screen tv .
Consequently , this type of screen has a length of 25 % larger than usual screen that will ultimately affect the weight and portability .
If you often play games on the laptop , then the 16:9 screen will provide a more enjoyable experience .
The default screen with 4:3 aspect ratio commonly used for office and business purposes .
The screen of this size offers a compact shape and lighter weight .

4. Power Consumption.

Larger laptop screen means also require greater power supply anyway .
This of course will affect the battery life and energy consumption .
For example , the laptop battery with 17.3 -inch screen on average only last 3 hours with a 90 - watt power input , while the laptop battery with a 15.6-inch screen capable of living up to 4.5 hours with power needs only 65 - watts .
So , thank you for reading this article . Written and posted by Bambang Sunarno .
sunarnobambang86@gmail.com
author:
http://schema.org/Personal.
https://plus.google.com/105319704331231770941.
name: Bambang Sunarno.
http://primadonablog.blogspot.com/2014/02/your-desktop-computer-is-damaged.html
DatePublished: February 01, 2014 at 20:28

7MHPNPADAEFW

Tag ; Your desktop computer is damaged, laptop, desk top

Lightning rod.

Lightning arrester is a device used to deliver electricity from the lightning to the ground .
Lightning rod is necessary in order that the flow of electricity from the lightning can be ' tamed ' so as not to endanger the structure or living things .
These devices are often referred to as a lightning conductor or rod Franklin .
Lightning rod is widely used throughout the world as a lightning protection system
Lightning rod is considered effective for reducing fire -related losses and structural damage due to lightning strikes .
These devices are generally made of metal , ideally highly conductive metal such as copper .
When lightning struck the metal , electricity will be distributed through the wire leading to the ground ( grounding ) .
Lightning rod works by diverting power from vulnerable structures . That's because, this tool commonly mounted on the roof of the building .
Lightning rod should be connected with a wire or cable that will directly distribute electrical energy to the ground , rather than propagating through telephone or electrical wires that could lead to fires .
Benjamin Franklin is recognized as the inventor of the lightning rod .
Franklin did some experiments with lightning , including the use of kites dicanteli key . He is a scientist who is very interested in exploring lightning and electricity .
Realizing that lightning is a major threat , Franklin came up with the idea of ​​a lightning rod then immediately skyrocketed its popularity .
Hundreds of years later , people still use the basic design found Benjamin Franklin.
There is some debate over how the shape of the tip of the lightning rod . Franklin lightning rod design is shaped like a giant needle with a pointed end .
Many Americans like this design because it is very effective .
However , most of the British designer found a lightning rod would be better if the ball -shaped tip .
All of these design differences seem to work equally effectively .
Differences lightning rod end design is more determined by the preferences of each user .

Lightning rod is a circuit that functioned to maintain an area with a certain radius in order to avoid the danger of lightning
Lightning rod is composed of four types , namely ;
1 . Franklin type lightning rod Rod / convensional
2 . Radioactive lightning rod type electrotis
3 . Corona Ionization type of lightning rod
4 . Lightning arrester type the Faraday Cage
Convensional lightning rod :
Lightning rod is effectively used for narrow areas such as housing , buildings, gas stations , tower bts , etc.
Convensional lightning rod sytem is a string of which functioned as a lightning lane lines atu electrical charge generated from the flash of light striking the conductor ( Air terminal splitzen / spplitzen / spear lightning rod ) is installed on the end or on top of buildings and circulate through Kable bc to the grounding system in the chopped without damaging the objects in its path .
Components of a lightning rod convensional series are:

1 . Splitzen / Airterminal Splitzen / lightning spear

     Consists of 3 types of  ;
     A. splitzen with spear pointed tip with varying sizes
          adjusted to the needs or the area to be protected
          Size : for pipe/pole with a quasi three quarters in length of 30 cm, 25 cm,  
          and 60 cm.
                  : For pipe / pole with quasi 1 -in length of 30 cm, 25 cm, and 60 cm.
     Bs . Splitzen Trisula
         Splitzen Trident has a unique shape that is with 3 heads
         conductor which serves to receive a lightning strike with a certain radius .
         Size splitzen trident namely :
         Size : for pipe / pole with quasi 3/4 in
                 : For pipe / pole with a quasi- 1 in
    C . Splitzen Aluminum.
Splitzen aluminum base material is made of aluminum commonly used for the tower needs .
Splitzn ade ​​of pure copper base function will be compared with the current Babet made ​​many in the market , because it can not drain current Babet perfectly therefore , to achieve maximum results make no mistake selecting raw material as it will result in fatal .
To know the basic ingredients of splitzen enough to scrape the surface :
if the color of his skin changed color it white or pewter color ( silver ) it is made ​​of Babet and it is very dangerous if in contact with a bolt of lightning , as it will be easily broken but it also will not be able to drain current to the ground .
And if the skin is scraped red color arises from the material it is made ​​of copper and it is slpitzen that can be used for lightning protection conductors in the circuit .

2 . Cable conductor / Kable BC

Conductor cable made ​​of braided copper wire . Diameter conductor braided cable
about 1 cm to 2 cm . Conductor cable to continue the flow of electric charge function
of electrical charge to the ground rod . The conductor cable installed on the wall
on the outside of the building .

3 . Lightning-rod .

      Usually made of iron pipe with threaded or quasi adjusted with
      the size of the lightning rod that will be used .

4 . Clam bc .

      This tool is used to connect the circuit cable bc lightning rod .

5 . Ardeu + eart rod clamp .

Thank you for reading this article. Written and posted by Bambang Sunarno .
sunarnobambang86@gmail.com
author:
http://schema.org/Personal.
https://plus.google.com/105319704331231770941.
name: Bambang Sunarno.
http://primadonablog.blogspot.com/2014/02/lightning-rod.html
DatePublished: February 01, 2014 at 19:52

7MHPNPADAEFW

Tag ; Lightning rod, Lightning, rod

Did You Know About Copper & Copper Wire.

Copper is a transition metal that is included in group 11 of the periodic table.

Its chemical formula is Cu copper. This element is found in the United States, Canada, and Australia.
Although it has many uses, most commonly copper used in the manufacture of electrical wiring.

Copper wire. 

1. Copper is the oldest metal used in the manufacture of wire and cable.
2. There are three types of twisted pair copper cable, coaxial, and twin axial.
3. Copper cables used for wiring for indoor and outdoor networks may look the same but actually not. The difference mainly lies in the insulation jacket. Insulation jacket for outdoor cable network made of materials that can withstand weather changes, while insulating jacket for indoor wiring made of soft plastic such as PVC.
4. When testing the flow of charge on copper wire cables, one can not test it around the coil due to the magnetic field generated by the coil center will inhibit the flow of electricity through the wires.
5. There are many uses of copper wire, the most important are given below:
- Used in electrical wiring for homes and buildings
- Used in the manufacture of jewelry because it is easily forged
- Used for fishing in deep waters
- Used for internal wiring of electrical equipment
6. Electric charge through the wires, including copper wires, depending on several factors such as capacitance, resistance, and attenuation.
7. Wire resistance is inversely proportional to the current through the wire. Barriers wire depends on factors such as the thickness of the wire. The higher the resistance wire, the lower the amount of current through it.
8. Increased demand has led to rising copper wire theft of copper wire by irresponsible people.

Copper metal. 

1. Copper is a soft metal with a specific gravity of 8.2 and has a chemical valence +1 (cuprous) or +2 (cupric).
2. Copper is a natural element with atomic number 29. Copper Name (English Idioms: copper) is taken from the Latin word Cuprum.
3. Pure copper is orange with a red tinge.
4. Cuprum name comes from the mountains in Cyprus where the Romans mined copper.
5. Copper is one of the most abundant mineral in the earth's surface and are found in all parts of the world.
6. In addition to the pure metal form, copper is also found in nature in the form of salts (sulphides and carbonate) and oxides.
7. Copper is extracted from the ore by roasting (for oxide ore and carbonate) and smelting (sulfide ores).
8. Copper is a metal that is good in conduct heat and electricity and only lost by silver.
9. Copper metal is very easily formed into a thin sheet and resilient so that it can be drawn to form a thin wire.
10. Copper metal does not react with acid unless the nitric acid is a strong oxidizing agent. Copper reacts with nitric acid to form nitrate.
11. Known copper corrosion resistant. When prolonged contact with the atmosphere, the green layer is formed on the metal surface. Green layer is due to the formation of copper sulfate or copper chloride.
12. Copper burns in oxygen to red oxide to form. The melting point of copper is 1083.4 degrees Celsius.
13. Copper is used in electrical wiring, to make cooking utensils, boilers, steam engines, and making alloys with other metals.
14. Copper with other metals to form alloys such as brass, bronze, German silver, gunmetal and bell metal. Each of these alloys contain a mixture of copper and other metals in a certain amount.

Inventors and Historical Uses of Copper Age Prehistory. 

Inventor of copper was unknown for sure because it has been used by humans since prehistoric times.
Archaeological evidence suggests that the copper was found nearly 10,000 years ago, or between 8,000 to 9,000 BC
There is plenty of historical evidence that reveals the use of copper in the ancient world to make jewelery, equipment, and weapons such as knives, spears and shields.
Historians argue that the Romans used copper metal on a large scale so that it became one of the most important commodities.
The Romans mined copper from the island of Cyprus. This causes the metal was named after the Latin word for Cyprium or Cyprus.
Later, the name Cyprium be modified into cuprum the scientific name of copper. In English, cuprum then called copper.
Copper is known for its natural sheen and is associated with Aphrodite and Venus, goddess of love and pleasure ancient Greeks and Romans.

First Metals 

Copper is considered as one of the first metal used by humans.
The discovery of copper triggers the transition from the neolithic era to the era of Chalcolithic or Copper age.
Copper is a metal that is naturally found in its pure form. It's just one of the disadvantages of using copper in its pure form is soft.
To solve this problem, ancient humans began experimenting and eventually found the two most popular copper alloy is brass and bronze, which are produced by mixing copper with zinc and tin.
Brass and bronze are much stronger than copper and can be used to make weapons and various other tools.
Various Middle Eastern countries (along the Fertile Crescent) had evidence of copper mines and smelters are thousands of years old.
Many ancient civilizations, especially the Romans, using copper as a currency.
Copper alloys are used to make weapons, shields, and armor. Indian traditional medicine, Ayurveda, recommends the use of surgical tools made of copper.
The ancient Egyptians are also known to use copper for sterilizing wounds and water.
These practices are supported by modern research showing that copper alloys have antimicrobial properties of active and passive copper known to inhibit the growth of microbes on its surface.
Currently, copper is a metal vital because it is very good as a conductor of heat and electricity.
Large reserves of copper can be found in Canada, Chile, Peru, United States, Zambia and Indonesia.
So, thank you for reading this article. Written and posted by Bambang Sunarno.
sunarnobambang86@gmail.com
author:
http://schema.org/Personal.
https://plus.google.com/105319704331231770941.
name: Bambang Sunarno.
http://primadonablog.blogspot.com/2014/02/did-you-know-about-copper-copper-wire.html
DatePublished: February 01, 2014 at 18:44
7MHPNPADAEFW
Tag ; Copper & Copper Wire, copper

Transfer agreement.

Neymar transfer Scandal long tails.
In addition to being the cause of Sandro Rosell resigned from his position as president of Barcelona, ​​the case will now be venturing into the realm of law.
The plan to drag the former club Santos Neymar, Neymar da Silva, father of 21-year-old, to justice.
Santos reportedly was disappointed to Neymar's father because only give a verbal description of the transfer agreement.
Da Silva judged not explain in detail about a number of clauses in the contract.
"There are ways that we can know (the truth of Neymar's father). Santos made an agreement that we send the documents and everything related to the negotiation process," said Santos representative to the Goal.
Previously, the father pledged to meet with representatives of Neymar Santos. The meeting was held to reveal the existence of a secret clause based on trust between them.
That means Neymar's father can say without showing anything to Santos.
"Santos will bring (the transfer case) to the legal domain, and we will wait for an answer. When you have someone who paid EUR 40 million, what happens is that everyone can be suspected. We were very disappointed with Barcelona statement because it was not what he had we negotiate, "he added.
So, thank you for reading this article. Written and posted by Bambang Sunarno.
sunarnobambang86@gmail.com
author:
http://schema.org/Personal.
https://plus.google.com/105319704331231770941.
name: Bambang Sunarno.
http://primadonablog.blogspot.com/2014/02/transfer-agreement.html
DatePublished: February 01, 2014 at 14:45
7MHPNPADAEFW
Tag; Transfer agreement.

Massa Fastest Last Day.

Concluding the first Mercedes Formula 1 testing at the Jerez circuit with convincing .
Williams driver Felipe Massa was fastest on the fourth day which is the last day yesterday ( 31/1 ) .
Massa posted a time of 1 minute 28.229 seconds , slower than the previous best time record for wet track .
Kevin Magnussen , who led a record time on the third day , the fourth fastest yesterday .
Nevertheless rookie McLaren - Mercedes could still smile because it can go without problems throughout the 110 laps .
Magnussen laps total only surpassed by Ferrari driver Fernando Alonso of 115 laps around the circuit .
Mercedes driver Nico Rosberg spun as much as 91 laps of having to provide an opportunity for team-mate Lewis Hamilton to undergo trials at noon .
With the number of laps that have been quite a lot, the car driver can try to long run.

Problems RB10. 

In general, the results are quite satisfactory , although several times interrupted by a red flag hoisted forced because there was an incident .
If seeded teams generally get a satisfactory result , not so with the team as the defending champion Red Bull - Renault .
They are once again covered on the last day . Daniel Ricciardo just turning seven laps , no later than the time record, losing to lowly teams like Caterham - Renault .
With that condition , Red Bull should strive to resolve the issue on RB10 , so the next trial in Bahrain on 19-22 February , they could seek a strong foundation on their new cars .
Ricciardo could only seven laps as his car spun experiencing problems in the cooling system .
With the new engine regulations and the use of ERS , cooling problem is a fairly complicated problem .
" This is a difficult test for us , " said Christian Horner , team principal of Red Bull to Crash .
" We experienced some problems on our Renault engine , also the cooling problems on the chassis . 's All very disturbing our program , " he continued .
Red Bull chief designer Adrian Newey reported directly contrary to the team's headquarters in the UK to analyze and find solutions to the problems experienced by RB10 .
So , thank you for reading this article . Written and posted by Bambang Sunarno .
sunarnobambang86@gmail.com
author:
http://schema.org/Personal.
https://plus.google.com/105319704331231770941.
name: Bambang Sunarno.
http://primadonablog.blogspot.com/2014/02/massa-fastest-last-day.html
DatePublished: February 01, 2014 at 13:58

7MHPNPADAEFW
Tag ; Massa Fastest Last Day, RB10

About different MP4-29.

Blockers on Rear Suspension for Aero .

After not seize a single podium last season , McLaren - Mercedes ready rampage this season .
How they dominated the test session in Jerez is the signal . Blockers on the rear suspension widened touted one of the key pace MP4 - 29 .
When compared with the other teams in the rear suspension , rear suspension rods MP4 - 29 is different .
On the other team , the suspension rod sticks shaped like an elongated connecting the wheel to the car body .
Suspension rods belonging to McLaren , amounting to four pieces are equipped with fin -shaped blocker .
Apparently, the wrapped blocker , McLaren rear suspension can provide an aerodynamic advantage .
When the low speed , blockers can increase downforce . In high speed , the unique suspension can reduce wind resistance .
The advantage of this is believed to be one of the reasons why so fast in the McLaren at Jerez test .
Absent on the first day ( 28/1 ) due to electrical problems , they immediately fastest on the second day by Jenson Button .
On the third day , the McLaren rookie Kevin Magnussen is also capable of being the fastest .
Until now , the unique suspension FIA McLaren was not at issue , because the extra blocker was indeed part of the suspension .
The teams competitor plans to ask the FIA ​​to ascertain whether it is legal McLaren suspension .
If allowed , they will be abuzz cheating . Very hard to do because it would require a revolution in the rear suspension , but because the effect is so large , it seems McLaren competitors will allocate a lot of energy to develop .
Ferrari technical director James Allison is one of those who paid attention to the suspension of the McLaren .
" I have not seen in detail . Just a cursory look through the motion blur on some sites , " said Allison told Autosport .
" I will observe it in more detail , " he continued .
Rod Nelson , chief test engineer Williams and support , without straightforwardly stated the suspension will cheat .
They will begin to develop in the wind tunnel if there is confirmation from the FIA ​​that McLaren suspension is legal .
" There are some parts of the other teams that we will test in the wind tunnel , " said Nelson .
" McLaren rear suspension is one concrete example . Legalize If FIA , we will not hesitate to develop it , " he said .
Nelson assess , McLaren 's unique suspension expedite the flow of air from the diffuser .
" The function of the last season performed by the lower rear wing , but part of it is now prohibited , " he said .
Because part of the suspension , the rear suspension blocker MP4 - 29 participated opens or closes when the speed of the car changed . When the MP4 - 29 in low-speed , high car ride in a higher position . That means the distance of the bottom of the car with asphalt are relatively distant . These conditions will also occur when you are driving a car in low speed. In contrast to the high speed , the car ride high in the lower position .
In case of a high ride height , blockers will close the gap on the top of the diffuser .
It gives a higher downforce .
In contrast , the high ride position is lower, when the car in high speed , it will open up blockers to reduce drag .
So , blocker -shaped fin on the MP4 - 29 rear suspension that gave the two aerodynamic advantages at once, either when the car is in the high or low speed .
Thank you for reading this article . Written and posted by Bambang Sunarno .
sunarnobamban86@gmail.com
author:
http://schema.org/Personal.
https://plus.google.com/105319704331231770941.
name: Bambang Sunarno.
http://primadonablog.blogspot.com/2014/02/about-different-mp4-29.html
DatePublished: February 01, 2014 at 10:30

7MHPNPADAEFW

Tag ; About different MP4-29, MP4-29